User Manual
Table Of Contents
- Internal-Antenna Nortel Networks WLAN - Access Point Quick Installation Guide
- ATTENTION!
- Overview
- Step 1: Collecting Required Tools and Supplies
- Step 2: Configuring the Nortel Networks WLAN - Access Point Before Installation
- Step 3: Preparing Mounting Locations
- Step 4: Mounting the Nortel Networks WLAN - Access Points
- Step 5: Returning MAC Information
- Planning Notes
- Safety Considerations
March 16, 2004 15
Step 4: Mounting the Nortel Networks WLAN - Access Points
Ceiling-Mount ClipsCeiling-Mount Clips
When you are mounting the Nortel Networks WLAN - Access Point on the extruded aluminium rails of a
hanging ceiling, use the ceiling-mount clips to mount the Nortel Networks WLAN - Access Point as
shown in the following figure and as described below:
Figure - Assembling the Nortel Networks WLAN - Access Point and Ceiling-Mount Clips
• Copy the MAC address(es) from the label(s) on the Nortel Networks WLAN - Access Point onto
the corresponding location on the map. MAC addresses have the format 000B85xxxxxx.
• Attach the ceiling-mount clips to the bottom of the Nortel Networks WLAN - Access Point using
the factory-supplied machine screws and washers.