User's Manual

Chapter 2 — Identifying the Option 11C Mini equipment Page 37 of 332
Option 11C Mini Planning and Installation Guide
Cables and wires
Table 5 lists the Option 11C Mini cable kits and their contents.
Table 5
Option 11C Mini cable kits
Cable or wire Purpose/description
NTDK88 Main cable kit
NTBK48 three-port SDI cable The NTBK48 connects equipment, such as
TTYs and modems to the Option 11C Mini.
Use the NTBK48 with the NTDK97 MSC
card.
NTAK1104 AUX cable The NTAK1104 connects a PFTU to a
system chassis.
A0601396 F-M DCE to DTE
converter
You can use the A0601396 when
connecting SDI ports to equipment, such
as TTYs and modems.
A0601397 F-F DCE to DTE
converter
You can use the A0501397 when
connecting SDI ports to equipment such
as TTYs and modems.
A037683 Ferrite filter
NTDK89 Chassis Expander cable kit
NTDK95 CE-MUX/DS-30X bus
cable
The NTDK95 connects the Main Chassis
to the Chassis Expander. You need two of
these cables to connect the Main Chassis
and the Chassis Expander.
Length: 2 ft (610 mm)
NTTK15 cable kit for Australia/New Zealand
A0386023 power cord for
Australia and New Zealand
The A0386023 connects a system chassis
to a 220 V AC commercial power source.
Length: 8 ft (2438 mm)
A0376837 Ferrite filter
NTTK22 cable kit for Denmark
A0386026 power cord for
Denmark
The A0386026 connects a system chassis
to a 220 V AC commercial power source.
Length: 8 ft (2438 mm)
A0376837 Ferrite filter