User's Manual

Page 324 of 332 Appendix B – Changing preprogrammed data
553-3021-209 Standard 3.00 April 2000
Conflicts with Flexible Feature Codes
If the preprogrammed Flexible Feature Codes (FFC) conflict with the
programming required for the Option 11C Mini system, remove the data from
the system using LD 57.
LD 57
To change one or more access codes, enter the following commands:
REQ CHG, END Change or end
TYPE FFC FFC = Flexible feature codes
CUST 0-31 Customer Number
FFCT YES,(NO) FFC Confirmation tone
CODE aaaa Enter access code prompt (aaaa)
AAAA xx Enter the new access code prompt
(AAAA)
CODE <CR> Return to REQ
REQ END End program
To remove one access code, enter the following commands:
REQ OUT Action request
TYPE FFC FFC = Flexible feature codes
CUST 0-31 Customer Number
FFCT YES,(NO) FFC Confirmation tone
ALL NO Remove specific access code
CODE aaaa Enter access code prompt (aaaa)
AAAA xx Enter the new access code prompt
(AAAA)
CODE <CR> Return to REQ
REQ END End program