User's Manual

Appendix B – Changing preprogrammed data Page 323 of 332
Option 11C Mini Planning and Installation Guide
Conflicts with the attendant extension number
You cannot remove the attendant extension number completely from the
Option 11C Mini system data, but you can replace it with another number.
LD 15
REQ CHG CHG = Change
TYPE CDB CDB = Customer Data Block
CUST x “x” = Customer number
.
ATDN xxxx “xxxx” = the new extension number
Changing or removing the preprogrammed night number
To change or remove the night number, use LD 15.
LD 15
REQ CHG CHG = Change
TYPE CDB CDB = Customer Data Block
CUST x “x” = Customer number
NIT1 bbbb, or X aaaa “bbbb” = the new extension number (DN)
Or
“aaaa” = the current night number
(the night number is now removed).