User's Manual

Page 286 of 332 Appendix A – Preprogrammed data
553-3021-209 Standard 3.00 April 2000
Passwords and codes
Table 78 lists each function in the left column with its password or code on
the right.
Table 78
Passwords and codes
Default numbering plan
The default numbering plan for Option 11C Mini is based on the following
guidelines:
• The default numbering plan uses four digits and starts at 2200.
• The prime extension number (DN) for each telephone is in the range
2200-2XXX. The value of “XXX” varies depending on the number of
telephones that you have in the system. Any secondary extension
numbers use numbers outside this range. This arrangement allows the
Option 11C Mini and Meridian Mail Mini to automatically configure
telephones and their mailboxes.
• Meridian Mail Mini uses extension 7000 for access, 7001 for Auto
Attendant, 7002 for Express Messaging, and 7003 for Prompt
Maintenance.
• Meridian Mail Mini Virtual Agents are preconfigured for card slot 10 in
Units 0, 1, 2, 4, 5, 8, 9, 10, 11, 12, and 13 of the Chassis Expander.
• The Central Answering Position has an extension of 7700. You can
change this extension in LD 15.
Function Code or extension(s)
TTY password
(For access to TTY Option 11C Mini overlays)
0000
Meridian Mail Mini administration password adminpwd
Administration telephone password
Administration telephone FFC
1234
*41
SPRE code 1
Telephone relocation Flexible Feature Code *40
Telephone Removal Flexible Feature Code *42
Telephone relocation password (SCRD) 1234