User's Manual

Page 244 of 332 Chapter 17 — Connecting the telephones
553-3021-209 Standard 3.00 April 2000
Cross-connecting terminal Digital Subscriber Loops
Refer to
ISDN BRI Administration and Maintenance Guide (553-3011-311)
for a complete description of terminal Digital Subscriber Loops (DSL) cross-
connecting and installation.
Activating telephones
Activating telephones is not difficult. Activate each telephone by performing
a procedure on the telephone. Automatic Set Configuration is the software
feature used to activate telephone sets.
Note:
You cannot activate the data feature using the procedures in this
chapter. To program a telephone with the data feature, configure it in
LD 11 with Data Class of Service. See the
X11 Software Administration
Guide
.
This chapter contains procedures for activating the following models of
telephones:
• a default model with a default extension number
• a customized model with a customized extension number
This chapter provides these procedures for telephones with and without
character displays.
Telephone tones
There are a number of different telephone tones. Table 54 includes tones that
you hear during telephone activation. Table 55 includes tones that you hear
during telephone activation in Germany.