User's Manual

Page 234 of 332 Chapter 17 — Connecting the telephones
553-3021-209 Standard 3.00 April 2000
Connecting telephones without a PFTU
Procedure 31
Connecting telephones without a PFTU
1 Locate the telephone terminations on the cross-connect terminal.
2 Connect one end of the cross-connect wire to the leads of the
telephone.
3 Locate the line card terminations on the cross-connect terminal.
Refer to Table 49 on page 239.
4 Connect the other end of the cross-connect wire to the assigned
TN terminal block.
Table 52 on page 242 provides default DN assignments.
Now, you can activate the telephone, as described on page 244.
—————————— End of Procedure ——————————
Connecting analog (500/2500-type) telephones with a PFTU
Procedure 32
Connecting 500/2500-type telephones with a PFTU
1 Locate the telephone terminations on the cross-connect terminal.
2 Connect one end of the cross-connect wire to the leads of the
telephone.
3 Locate the PFTU connections (unit PFT 1 through PFT 5)
assigned to this telephone at the cross-connect terminal.
Refer to Table 50 on page 239.
4 Connect the other end of the cross-connect wire to the pair
assigned to the telephone on the PFTU.
5 Connect a second cross-connect wire to the pair assigned to the
line card on the PFTU.
6 Locate the line card terminations on the cross-connect terminal.
Refer to Table 49 on page 239.