User's Manual

Page 202 of 332 Chapter 15 — Installing and connecting SDI and Ethernet ports
553-3021-209 Standard 3.00 April 2000
3 Change the value in each field on each setup screen as
necessary.
Use the keys listed in Table 45 to view and change setup values.
4 Save changes by returning to the
General setup screen, moving
the cursor to the Saved field, and pressing
<Enter> .
—————————— End of Procedure ——————————
Table 45
Setup (keys and functions)
Key Function
Arrow key Move from field to field
<Enter> Scroll through possible values or cause
requested action to occur (depends on type
of field)
<Next Screen> Move to next setup screen
<Prev Screen> Move back to last screen