User's Manual

Page 196 of 332 Chapter 15 — Installing and connecting SDI and Ethernet ports
553-3021-209 Standard 3.00 April 2000
NTAK02 SDI/DCH card
Only the Main Chassis supports the NTAK02 SDI/DCH card. You can
configure this card to support ports for the following:
• two SDI and two DCHI
• one SDI, one DCHI, and two ESDI
•four ESDI
You can use the NTAK02 ports to access overlay software. Define these ports
in the configuration database as the SDI logical type.
An NTAK19FB 4-port SDI cable is designed for use with the NTAK02
circuit card. However, you can use an NE-A25B 25-pair cable to extend the
connections to the cross-connect terminal. See Tables 39 through 42 for the
connections for each port.