Server User Manual

Page 78 of 488 Rack-mounting the components
553-3041-210 Standard 4.00 September 2007
The 19 Inch Rack Mount Kit (NTTK09) contains the following accessories:
• 1 – left guide bracket
• 1 – right guide bracket
• 1 – left ear bracket
• 1 – right ear bracket
• 4 – #8-32 machine screws
Follow Procedure 2 on page 78 to remove the cover on a Media Gateway or
a Media Gateway Expander.
Procedure 2
Removing the cover
1 If the cover lock latches are in their locked position:
a. Use a flat screwdriver to slide the icon away from the latch. Refer to
Figure 14 on page 79.
b. Slide both spring-loaded latches simultaneously down toward the
bottom of the Media Gateway, and pull forward. Then lift the cover
upward to remove it from the Media Gateway. Refer to Figure 15 on
page 79.
Note: The bottom of the front cover is supported by, but not secured to,
the Media Gateway. Do not drop it.