Server User Manual

Rack-mounting the components Page 77 of 488
Communication Server 1000E Installation and Configuration
Procedure 1
Rack-mounting a CS 1000E Call Server
1 Slide the CS 1000E Call Server into the rack until the ear brackets rest
against the rack support. See Figure 13.
Figure 13
CS 1000E Call Server with installed ear brackets
2 Fasten the CS 1000E Call Server to the rack supports with #10-32
machine screws (two screws on each side).
End of Procedure
Rack-mounting a Media Gateway or
Media Gateway Expander
References to the Media Gateway in this section also apply to the Media
Gateway Expander. The Media Gateway Expander can be mounted either
above or below the Media Gateway.
The following items are required to mount each Media Gateway or Media
Gateway Expander in a 19-inch rack:
• equipment layout plan
• 8 – #10-32 machine screws
• 19-Inch Rack Mount Kit (NTTK09)