Server User Manual

Installing and configuring IP Phones Page 417 of 488
Communication Server 1000E Installation and Configuration
4 Repeat Steps 2 and 3 for each IP Phone.
End of Procedure
Setting administrator and temporary IP Telephone
Installer passwords
IP Phone Installer Passwords is an optional feature that provides protection
against unauthorized modification of the TN on the IP Phones. For detailed
information about the IP Phone Installer Passwords, see IP Line: Description,
Installation, and Operation (553-3001-365).
The IP Phone Installer Passwords are configured on either a Signaling Server
or a Media Card in a node. The passwords then apply to all components in the
node.
Procedure 105
Setting passwords for the administrator and temporary
IP Telephone Installer
Note: This procedure can also be performed from the CLI of a Signaling
Server or Media Card.
1 Log in to Element Manager.
2 Select IP Telephony > Nodes: Servers, Media Cards > Maintenance
and Reports from the navigator.
The Node Maintenance and Reports web page opens, as shown in
Figure 115 on page 340.
Key 25 CHG, NUL
CHG – Charge Account key
Key 26 CPN, NUL
CPN – Calling Party Number key
Table 54
IP Phone dedicated soft key assignment (Part 2 of 2)
IP Phone key number Response(s) Allowed