Server User Manual

Installing and configuring IP Phones Page 412 of 488
Communication Server 1000E Installation and Configuration
2 Enter the appropriate responses shown in Table 53.
Table 53
LD 11 – Configure an IP Phone. (Part 1 of 4)
Prompt Response Description
REQ: NEW CHG Add new or change existing data
TYPE: i2001
i2002
i2004
i2050
For IP Phone 2001, IP Phone 2002, IP Phone 2004, or
IP Softphone 2050. CS 1000E accepts this response if it
is equipped with packages 88 and 170.
TN
l s c u
c u
Terminal Number
Format for CS 1000E, where:
l = 0, 4, 8, - 252: superloop number in multiples of 4
s = 0-1: MG 1000E on superloop
c = 1-4, 7-10
u = 0-31, (see Table 64 on page 485)
Format for MG 1000T, where:
c = 0-4, 7-10, 11-14, 17-24, 27-34, 37- 44, 47-50
u = 0-31
DES d...d Office Data Administration System Station Designator
CUST xx Customer number as defined in LD 15
ZONE 0-255 Zone number to which this IP Phone belongs
CLS ADD Class of Service
ADD - Automatic Digit Display, (default for IP Phone)
For a complete list of responses, refer to Software Input/
Output: Administration (553-3001-311).