Server User Manual

Installing and configuring IP Phones Page 396 of 488
Communication Server 1000E Installation and Configuration
Introduction
The following IP Phones can be installed on a CS 1000E system:
• Nortel IP Phone 2001
• Nortel IP Phone 2002
• Nortel IP Phone 2004
• Nortel IP Softphone 2050
• Nortel IP Phone 2007
• IP Audio Conference Phone 2033
• WLAN Handsets 2210/2211/2212
• MVC 2050
The system must be configured before the IP phones can be installed. The
configuration includes:
• The IP Phone TN blocks must be defined on the Call Server (See
“Configuring VoIP bandwidth management zones” on page 408 or
“Using Set-Based Installation” on page 433).
• The IP Phones are assigned to an IP telephony node, and use the IP
telephony node properties defined using Element Manager (see
“Configuring an IP telephony node” on page 365).
• The IP Phones require local boot parameter configuration (see
“Configuring the IP Phone boot parameters” on page 424).