Server User Manual

Configuring an IP telephony node Page 373 of 488
Communication Server 1000E Installation and Configuration
1 Select IP Telephony > Node: Servers, Media Cards > Configuration
from the navigator.
The Node Configuration web page opens, as shown in Figure 132. If this
is the first node to be added, the “No nodes are configured” message is
displayed.
Figure 132
Node Configuration web page
2 Import the Node files from the leader Signaling Server.
a. Click Import Node Files.
The Import Node Files screen as shown in Figure 133 on page 374
appears.
b. Enter the ELAN IP address of the leader Signaling Server in the input
box.