Manualshelf

Server User Manual

ManualsBrandsNortel Networks ManualsTelephone1000E
361362363364365366367368369370
Page 362 of 488 Installing the Main Distribution Frame
553-3041-210 Standard 4.00 September 2007
4 Tighten the velcro straps when you have connected each cable to the
system.
5 Terminate all the 25-pair cables installed at the cross-connect terminal.
6 Label all the cables at the cross-connect terminal blocks according to the
card slot assignment plan.
7 Connect the AUX cable in the upper 9-pin connector located on the top
left-hand side of the Media Gateway. See Figure 127 on page 362.
Figure 127
AUX cable connector
AUX