Manualshelf

Server User Manual

ManualsBrandsNortel Networks ManualsTelephone1000E
341342343344345346347348349350
Page 342 of 488 Installing and configuring a Voice Gateway Media Card
553-3041-210 Standard 4.00 September 2007
2 Open the desired node by clicking on the + next to the Node ID.
This displays the Signaling Servers and Voice Gateway Media Cards
belonging to the node, as shown in Figure 116 on page 341.
3 Click GEN CMD for the desired Voice Gateway Media Card.
The General Commands web page opens, as shown in Figure 117.
Figure 117
General Commands
4 From the Group drop-down list, select Vgw.
5 From the Command drop-down list, select vgwShowAll.
6 Click RUN.
Figure 118 on page 343 shows the General Commands web page with
the output from the vgwShowAll command. The output shows
information about all the voice gateway channels.