Server User Manual

Page 334 of 488 Installing and configuring a Voice Gateway Media Card
553-3041-210 Standard 4.00 September 2007
Press the Retaining Pin into the hole until the pin clicks as it locks into
position (labeled 2 in Figure 111). The underside of the head of the
Retaining Pin should be flat against the card.
Figure 111
Inserting the Retaining Pin
7 Turn the card over to view the front of the card. Ensure the Retaining Pin
is in place, as shown Figure 112 on page 334.
Figure 112
Retaining Pin fully inserted
End of Procedure