Server User Manual

Page 294 of 488 Installing and cross-connecting a trunk card
553-3041-210 Standard 4.00 September 2007
• NTRB21 TMDI 1.5 Mbit DTI/PRI
• NT6D70 SILC
• NT6D71 UILC
For additional information about installing Digital trunk cards, refer to the
following documents:
• ISDN Primary Rate Interface: Installation and Configuration
(553-3001-201)
• ISDN Basic Rate Interface: Installation and Configuration
(553-3001-218)
• ISDN Primary Rate Interface: Maintenance (553-3001-517)
• ISDN Basic Rate Interface: Maintenance (553-3001-518)
Connecting a trunk
Follow Procedure 75 to connect a trunk.
Procedure 75
Connecting a trunk
1 From the assignment record, determine the location of the trunk
connection and its associated Terminal Number (TN) at the
cross-connect terminal.
2 With cross-connect wire, connect the trunk to the TN.
Make sure that the wiring is not reversed and that it is on the correct
terminals.
• Table 20 on page 295 to Table 22 on page 298 list the connections
for trunks.
• For European trunk connections, see Table 23 on page 300 to
Table 31 on page 309.
• For UK trunk connections, see Table 32 on page 311 to Table 38 on
page 318.