Server User Manual

Configuring a terminal and SDI ports Page 269 of 488
Communication Server 1000E Installation and Configuration
Figure 87
VT220 setup values
CS 1000E Core Call Server SDI connection
Each CS 1000E Core Call Server has two SDI ports on the Call Server CPU
card, COM1 and COM2. Both COM1 and COM2 are standard RS232 DTE
ports (9-pin male). COM1 is used for maintenance access, and COM2 is for
an external modem connection. Both SDI ports, COM1 and COM2, are set to:
• Baud rate - 9600
• Data bit - 8
• Stop bit - 1
Global Set-Up
On Line Comm1=RS232
Sessions on Comm1 70Hz
CRT Saver Printer Shared
Display Set-Up
80 Columns Light Text, Dark Screen
Interpret Controls Cursor
Auto Wrap Block Style Cursor
Jump Scroll
General Set-up
VT200 Mode, 7-bit Controls Application Keypad
User Defined Keys Unlocked Normal Cursor Keys
User Features Unlocked No New Line
Multinational
Communications Set-Up
Transmit=2400 No Local Echo
Receive=Transmit Data Leads Only
Xoff at 64 Disconnect, 2 s Delay
8bits, No Parity Limited Transmit
1 Stop Bit
Printer Set-Up
Speed=9600
Normal Print Mode Print Full Page
8bits, No Parity, Print National Only
1 Stop bit No Terminator
Keyboard Set-up
Typewriter Keys Warning Bell
Caps Lock Break
Auto Repeat Answerback=
Keyclick High Not Concealed
Margin Bell
Tab Set-Up Screen
Leave this screen at the default values