Server User Manual

Page 268 of 488 Configuring a terminal and SDI ports
553-3041-210 Standard 4.00 September 2007
Setting the TTY terminal port
A TTY terminal can be any standard PC running terminal software, (for
example, HyperTerminal). The TTY terminal port must be configured as:
• Bits per second - Baud rate must be the same as the speed of SDI port.
• Data bits - 8
•Parity- None
• Stop bit – 1
• Flow control – None
• Terminal Emulation- VT100
Traditional terminal SDI connection
Figure 87 shows the setup values for a traditional terminal setup.