Server User Manual

Page 225 of 488
Communication Server 1000E Installation and Configuration
234
Configuring a Small System Controller
Contents
This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Adding a software daughterboard and remote security device . . . . . . . 226
Adding a 100BaseT daughterboard (dual port). . . . . . . . . . . . . . . . . . . 227
Adding a 100BaseT daughterboard (single port) . . . . . . . . . . . . . . . . . 231
Introduction
An NTDK20 Small System Controller (SSC) must be installed in each Media
Gateway. Security devices and Daughterboards can be installed on the SSC
prior to its placement in a Media Gateway. See Table 13 for details on the
SSC, including available accessories.
Table 13
Small System Controller profile (Part 1 of 2)
Property Description
Order Code • NTDK20HA
Power • Powered through a Media Gateway
Cooling • Provided by the Media Gateway
Card slots • None