Server User Manual

Configuring the CS 1000E Call Server Page 203 of 488
Communication Server 1000E Installation and Configuration
Follow Procedure 48 to configure login IDs and passwords.
Procedure 48
Configuring login IDs and passwords
1 Enter the command:
LD 17
CFN000
MEM AVAIL: (U/P): 1015918 USED U P: 138773 24956
TOT:1179647
DISK RECS AVAIL: 486
TMDI D-CHANNELS AVAIL: 0 USED: 0 TOT: 0
DCH AVAIL: 80 USED: 0 TOT: 80
AML AVAIL: 15 USED: 1 TOT: 16
2 Enter the command:
REQ CHG
3 Enter the command:
TYPE PWD
4 Enter the command:
PWD2 <xxxx>
Where:
<xxxx> = your current level 2 password
5 Enter the command:
LNAME_OPTION
6 Enter the command:
NPW1 <xxxx>
OR
<cr> for no change
Where
<xxxx> = new PWD1 password
7 Enter the command:
LOGIN_NAME <xxxx>