Server User Manual

Installing and configuring the Signaling Server software Page 187 of 488
Communication Server 1000E Installation and Configuration
11 Select the Network Routing Service (NRS) to be provided by this
Signaling Server. See Figure 64 for a co-resident Signaling Server or
Figure 65 on page 188 for a stand-alone Signaling Server.
• Enter a if this Signaling Server will provide an H.323 Gatekeeper and
a SIP Redirect/Proxy Server.
• Enter b if this Signaling Server will provide only an
H.323 Gatekeeper.
• Enter c if this Signaling Server will provide only a SIP Redirect/Proxy
Server.
• Enter d if this Signaling Server is a Leader Signaling Server and will
not provide an NRS. Go to step 13 on page 189.
Refer to IP Peer Networking: Installation and Configuration
(553-3001-213) for more information on the NRS.
Figure 64
Network Routing Service (NRS) — co-resident Signaling Server
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please select the Network Routing Service (NRS) configuration for this
Signaling Server.
Please enter:
<CR> -> <a> - H.323 Gatekeeper and SIP Redirect/Proxy Server.
<b> - H.323 Gatekeeper only.
<c> - SIP Redirect/Proxy Server only.
<d> - None.
Enter Choice>