Server User Manual

Page 180 of 488 Installing and configuring the Signaling Server software
553-3041-210 Standard 4.00 September 2007
Figure 55
Tested within 24 hours
The following messages display on the screen:
Testing hard disk ...
Testing partition /u (4194241 blocks) ...
xxx% complete
Testing partition /p (4194241 blocks) ...
xxx% complete
Hard disk testing succeeded.
Where xxx = 0 to 100.
Note: If the physical check did not pass, contact your technical support
group.
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
The Install Tool has detected that the hard disk has been tested
recently.
It is recommended to skip the hard disk test. If you select to test
Enter Choice> a
<b> - Test the hard disk.
<CR> -> <a> - Skip the hard disk test.
Please enter:
the hard disk anyway, it will take approximately 14 minutes.