Server User Manual

Installing and configuring the Signaling Server software Page 179 of 488

Communication Server 1000E Installation and Configuration

Figure 53

Hard disk test

• If the hard disk has not recently been tested, enter a at the menu

shown in Figure 54.

Figure 54

Not recently tested

• If the hard disk has been checked in the last 24 hours, enter a at the

menu shown in Figure 55 on page 180.

The Install Tool cannot determine when the hard disk was last tested.

The hard disk must be tested before installation can continue.

This test will take approximately 14 minutes.

Please enter:

<CR> -> <a> - Test the hard disk.

Enter Choice> a

=====================================================================

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

The Install Tool has detected that the hard disk has not been tested

recently.

Enter Choice> a

<b> - Skip the hard disk test.

<CR> -> <a> - Test the hard disk.

Please enter:

approximately 14 minutes.

It is recommended to test the hard disk now. This test will take