Server User Manual

Page 174 of 488 Installing and configuring the Signaling Server software
553-3041-210 Standard 4.00 September 2007
Figure 48
Copy IP configuration
5 When the Install Tool banner appears (Figure 49 on page 175), press
<CR> to perform system checks and begin software installation.
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please insert an empty diskette in the floppy drive
to backup the IP configuration.
Please enter:
<CR> -> <a> - Diskette is now in the floppy drive.
Continue.
<b> - Continue without copying IP configuration
<q> - Quit.
Enter Choice>