Server User Manual

Page 164 of 488 Connecting MG 1000T system components
553-3041-210 Standard 4.00 September 2007
Figure 44
Diagram of the Shielded 50-pin to Serial/ELAN/TLAN adapter
Procedure 38
Inserting a Shielded 50-pin to Serial/ELAN/TLAN adapter on to a
Media Card
1 Open the Media Card package NTDU41CA.
2 Remove the Shielded 50-pin to Serial/ELAN/TLAN adapter.
3 Save the other items from the package for use in “Installing a
CompactFlash” on page 330.
4 Insert the adapter, shown in Figure 44, into the connector Card 1, Card 2,
Card 3, or Card 4 that corresponds to the location of the Media Card.
For example, Figure 45 on page 165, the Media Card is installed in card
slot 1. Therefore, the Adaptor is installed in connector Card 1.
End of Procedure
Identification Label
TLAN RJ-45
LAN socket
ELAN RJ-45
LAN socket
RS-232 Connector
Voice Gateway Media Card
maintenance port
50-pin connector