Server User Manual

Page 130 of 488 Installing software on the CS 1000E
553-3041-210 Standard 4.00 September 2007
10 Select option “<b> To install Software, Database, CP-BOOTROM.”.
11 If the RMD containing the software is already in the drive, select option
‘<a> - RMD is now in drive. Continue with s/w checking.’ (or simply press
<CR>) to continue. If the RMD is not yet in the drive, insert it and then
press <CR>.
12 The system displays the release of the software found on RMD under the
‘swload’ directory and requests confirmation to continue the installation.
Note: If the RMD contains the correct software release, select option
‘<y> - Yes, this is the correct version. Continue.’ (or simply press
<CR>)
to continue. If the software release is not correct and you want to replace
the RMD, insert the correct RMD in the drive and then press
<CR>. If you
Communication Server 1000 Software/Database/
BOOTROM RMD Install Tool
=================================================P
lease insert the Removable Media Device into the
drive on Core 1.
Please enter:
<CR> -> <a> - RMD is now in drive.
Continue with s/w checking.
<q> - Quit.
Enter choice> <CR>
Communication Server 1000 Software/Database/
BOOTROM RMD Install Tool
=================================================
The RMD contains System S/W version xxxx.
Please enter:
<CR> -> <y> - Yes, this is the correct
version. Continue.
<n> - No, this is not the correct version.
Try another RMD or a different keycode.
Enter choice> <CR>