Manualshelf

Server User Manual

ManualsBrandsNortel Networks ManualsTelephone1000E
111112113114115116117118119120
Page 114 of 488 Connecting CS 1000E system components
553-3041-210 Standard 4.00 September 2007
3 Save the other items from the package for use in “Installing a
CompactFlash” on page 330.
4 Insert the adapter, shown in Figure 34, into the connector Card 1, Card 2,
Card 3, or Card 4 that corresponds to the location of the Media Card.
For example, in Figure 35 on page 115, the Media Card is installed in card
slot 1. Therefore, the adaptor is installed in connector Card 1.
End of Procedure
Connecting a Media Card to the ELAN subnet
Follow Procedure 19 to connect a Media Card to the ELAN.
Procedure 19
Connecting a Media Card to the ELAN subnet
1 Connect a standard CAT5 patch cable to the ELAN network interface on
the Adaptor (Figure 35 on page 115).
2 Connect the other end of the standard CAT5 patch cable to an RJ-45
ELAN network interface on the BayStack 470 switch