Switch Owner's Manual

Preface
204515-C xvii
Related Publications
For more information about using the Passport management software or other
Passport 8000 series equipment, refer to the following publications:
• Getting Started with the Passport 8100 Management Software
(part number 207311-C)
Provides instructions to install management software and describes general
use of the management software.
• Reference for the Passport 8000 Series Management Software Switching
Operations (part number 207414-C)
Describes how to use Device Manager software to configure and manage
layer 2 (switching) functions, including procedures and illustrations of the
software user interface.
• Reference for the Passport 8000 Series Command Line Interface Switching
Operations (part number 207308-C)
Describes the command line interface (CLI) commands and parameters. Most
configuration tasks that can be performed using the management software can
also be done using the command line interface.
• Networking Concepts for the Passport 8000 Series Switch
(part number 207307-C)
Provides general information and description of how a Passport routing
switch handles various networking features, such as VLANs and Multi-Link
Trunking.
separator ( > ) Shows menu paths.
Example: Protocols > IP identifies the IP option on the
Protocols menu.
vertical line (
| ) Separates choices for command keywords and
arguments. Enter only one of the choices. Do not type the
vertical line when entering the command.
Example: If the command syntax is:
show ip {alerts | routes}, you enter either:
show ip alerts or show ip routes, but not both.