Owner's manual

910 NTCK16 Generic Central Office Trunk cards
Table 389
LD 16 - Route Data Block for NTCK16AX.
Prompt Response Description
REQ: NEW Define a new unit
TYPE: COT Define a new Route Data Block
CUST
xx
Customer number as defined in LD 15.
ROUT Route number
0-511
Range for Large System, Call Server 1000E,
and Media Gateway 1000E
0-127
Range for Small System, CS 1000E system,
Media Gateway 1000B, and
Media Gateway 1000T
TKTP COT Define trunk type as Central Office
ICOG IAO Incoming and Outgoing trunk
CNTL YES Change a trunk timer
TIMER RGV 256 Set Ring Validation Timer to 128 ms.
MR (NO) PPM XLD PPM is off, buffered, or unbuffered on this route.
Trunk Data Block
Respond to the prompts in LD 14 as shown:
Table 390
LD 14 - Trunk Data Block for NTCK16AX.
Prompt Response Description
REQ: NEW Define a new trunk unit
TYPE: COT Central Office Trunk
TN Terminal Number
l s c u Format for Large System, Call Server
1000E, and Media Gateway 1000E,
where l = loop, s = shelf, c = card, u
= unit
XTRK
(See note on "page 803"
(page 911) .)
XCOT Type is IPE COT
CDEN (8D) Card density is 8D (default)
SIGL LOP Loop start signaling
PPID
(See "page 803" (page 911)
.)
Xx 04 Ireland/Turkey 12 KHz
03 Turkey 16 KHz
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.