Owner's manual

Architecture 783
• per-channel and all-channel loopback capabilities for near-end and
far-end
• self-test
•
download of incoming ABCD validation times from software
• warm SYSLOAD (TS16 AS16 transmitted)
Applicability to France
Features specific to DTI requirements for France are implemented in
firmware, and are switch-accessed. These are:
• transmission and reception of alarm indication signaling (AIS) in TS16
such as card disabled and warm SYSLOAD
• France-specific PPM counting
• decadic dialing
•
France-specific alarm report and error handling
Features specific to DTI requirements for France are implemented in
firmware, and are switch-accessed. These are as follows:
• transmission and reception of alarm indication signaling (AIS) in TS16
(card disabled, warm SYSLOAD, etc.)
•
France-specific PPM counting
•
decadic dialing
•
France-specific alarm report and error handling
Features specific to DTI requirements for France are implemented in
firmware, and are switch-accessed. These are:
•
transmission and reception of alarm indication signaling (AIS) in TS16
such as card disabled and warm SYSLOAD
•
France-specific PPM counting
• decadic dialing
• France-specific alarm report and error handling
Architecture
The main functional blocks of the NTAK10 card architecture include:
• DS-30X interface
• signaling interface
• three microprocessors
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.