Owner's manual

426 NT8D02 and NTDK16 Digital Line cards
Functional description of the NT8D02
The digital line card is equipped with 16 identical units. Each unit provides
a multiplexed voice, data, and signaling path to and from digital apparatus
over a 2-wire full duplex 512 kHz time compression multiplexed (TCM)
digital link. Each digital telephone and associated data terminal is
assigned a separate terminal number (TN) in the system database, for a
total of 32 addressable ports per card.
The digital line card contains a microprocessor that provides the following
functions:
•
self-identification
•
self-test
• control of card operation
• status report to the controller
•
maintenance diagnostics
Functional description of the NTDK16
The NTDK16 digital line card is equipped with 48 identical units. Each unit
provides a multiplexed voice, data, and signaling path to and from digital
apparatus over a 2-wire full duplex 512 kHz time compression multiplexed
(TCM) digital link. Each digital telephone and associated data terminal is
assigned a separate terminal number (TN) in the system database, for a
total of 96 addressable ports per card. Refer to Figure 113 "NTDK16 DLC"
(page 428).
The NTDK16 digital line card contains a microprocessor that provides the
following functions:
•
self-identification
•
self-test
•
control of card operation
• status report to the controller
• maintenance diagnostics
The card also provides
• Ability to support Digital sets and the Digital Console M2250
• Provides a serial link (Card LAN) for status report and maintenance.
• Supports loop lengths up to 3500 ft. (1.0 km) using 24 AWG wire.
• Interface between three DS30X loops and 48 TCM lines.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.