Owner's manual

Maintenance 403

Figure 105

MSDL states

A newly configured MSDL automatically enters the manually disabled

state. An operating MSDL can be manually disabled by issuing the DIS

MSDL x command in LD 37 (step 1 in Figure 105 "MSDL states" (page

403)).

Entering the DIS MSDL x command in LD 37 moves the card to manually

disabled status and stops all system communication with the card (step 5

in Figure 105 "MSDL states" (page 403)).

Manually enabled

When the card has been manually disabled, re-enable it with the ENL

MSDL x command in LD 37 (step 2 in Figure 105 "MSDL states" (page

403)).

System disabled

When the system disables the MSDL card (step 4 in Figure 105 "MSDL

states" (page 403)), it continues to communicate and attempt maintenance

procedures on the card. To stop all system communication with the

card, enter DIS MSDL x to disable it (step 5 in Figure 105 "MSDL states"

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311 02.06 Standard

27 August 2008