Owner's manual

Physical description 333

Cable diagrams

Figure 91 "DDP2 cable for systems with an I/O panel" (page 334) and

Figure 92 "DDP2 cable for systems without an I/O panel" (page

335) provide examples of typical cabling configurations for the DDP2.

Figure 91 "DDP2 cable for systems with an I/O panel" (page 334) shows a

typical DDP2 cabling for a system with an I/O panel, with the connection

between the I/O panel and a Network Channel Terminating Equipment

(NCTE).

Figure 92 "DDP2 cable for systems without an I/O panel" (page

335) shows cabling for a system without an I/O panel. Here, the DDP2

faceplate is cabled directly to the NCTE.

Note:

Since several clock cabling options exists, none has been

represented in the diagrams. Refer to “Clock configurations” (page

347) for a description on each available option.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311 02.06 Standard

27 August 2008