Owner's manual

Clocking Requirement 283

Figure 60 "MGC DECT Clock Reference Cable" (page 283) shows

the MGC DECT Clock Reference Cable. It is used to provide clock

reference between CS1000 Media Gateway Cabinet/chassis.

Figure 60

MGC DECT Clock Reference Cable

Connecting MGC DECT Clock Reference Cable

Step Action

1 Connect the MGC DECT Clock Reference Cable to the AUI port

of the back of the MG1000 chassis. Figure 61 "MG1000 chassis"

(page 283) shows the AUI port of the MG1000 chassis.

Figure 61

MG1000 chassis

2 In the Option 11C Mini chassis or Succession 1.0 MG chassis,

connect to 15-pin DSUB connector on the back panel formerly

used for the 10Base-T AUI connection. Figure 62 "Option 11C

Mini chassis or Succession 1.0 MG chassis" (page 284) shows

the 10Base-T AUI connection of the Option 11C Mini chassis or

Succession 1.0 MG chassis.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311 02.06 Standard

27 August 2008