Owner's manual

Clocking Requirement 215

Pre requisites

The pre requisites for connecting an MGC DECT Clock Reference Cable

are the following:

• MGC DECT Clock Reference Cable --- NTDW67AAE5.

Figure 38 "MGC DECT Clock Reference Cable" (page 215) shows

the MGC DECT Clock Reference Cable. It is used to provide clock

reference between CS1000 Media Gateway Cabinet/chassis.

Figure 38

MGC DECT Clock Reference Cable

Connecting MGC DECT Clock Reference Cable

Step Action

1 Connect the MGC DECT Clock Reference Cable to the AUI port

of the back of the MG1000 chassis. Figure 39 "MG1000 chassis"

(page 215) shows the AUI port of the MG1000 chassis.

Figure 39

MG1000 chassis

2 In the Option 11C Mini chassis or Succession 1.0 MG chassis,

connect to 15-pin DSUB connector on the back panel formerly

used for the 10Base-T AUI connection. Figure 40 "Option 11C

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311 02.06 Standard

27 August 2008