Owner's manual

Installation and configuration 209

Figure 37

Lineside T1 card - connecting two or more cards to the MMI

--End--

Terminal conﬁguration

For the MMI terminal to be able to communicate to the Lineside T1 card,

the interface characteristics must be configured to the following:

• Speed – 1200 or 2400 bps, depending on the setting of switch position

1 of Switch 1

• Character width – 8 bits

• Parity bit – none

• Stop bits – one

• Software handshake (XON/XOFF) – off

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311 02.06 Standard

27 August 2008