User's Manual

12
CHANGING SYSTEM SETTINGS
CHANGING THE SYSTEM'S CODE
CHANGING THE SYSTEM'S FREQUENCY
ON A CONSOLE:
1. START WITH THE POWER OFF
2. PRESS & HOLD DOWN ALL CALL & TALK BUTTONS
3. TURN POWER ON WITH THE VOLUME KNOB
4. WHEN ALL STATION LIGHTS FLASH, RELEASE BUTTONS.
IF, AFTER CHANGING FREQUENCY,
ANOTHER INTERCOM SYSTEM
IS STILL COMMUNICATING WITH YOUR
SYSTEM, TRY CHANGING YOUR
SYSTEM'S SECURITY CODE
CONSOLE
DOORBELL
B
A
NOTE: ALL FREQUENCY
SWITCHES MUST MATCH
THEN:
PRESS THE ALL CALL BUTTON, THIS WILL
CHANGE THE CONSOLE'S SECURITY CODE
THEN:
REFER TO THE "PROGRAMMING THE STATIONS"
SECTION IN THIS MANUAL AND PERFORM
STEPS #3, #5, & #6
THIS WILL PROGRAM THE NEW "SECURITY CODE"
INTO ALL OF THE OTHER UNITS
IF ANOTHER INTERCOM SYSTEM
IS COMMUNICATING WITH YOUR
SYSTEM, TRY CHANGING YOUR
SYSTEM'S FREQUENCY
CHANGE THE FREQUENCY
SWITCH ON EACH CONSOLE
CHANGE THE FREQUENCY
SWITCH ON EACH DOORBELL
214601 X1 - IMAGE 14 214601 X1 - IMAGE 15