User's Manual

5
Arming history
The arming history command is serviced by the ARM DISPLAY message
packet. Individual arm or disarm events are sent from the panel to the
keypad in a single message packet; if arming, any bypassed zones are
also included (up to 15) in the same message packet. These events are
displayed one event at a time on the LCD. The user may scroll through
these events and bypassed zones by pressing the keys.
When viewing the last event in the list, pressing the key when displaying
an event with no bypassed zones or the last bypassed zone listed will
cause the keypad to send the key press to the panel, which in turn will
provide a DISPLAY ARM message packet for the next event in the panel’s
arming history.
When viewing the fi rst event in the list, pressing the key when displaying
an arm or disarm event will send the key press to the panel, which will
provide a DISPLAY ARM message packet for the previous event in the
panel’s arming history.
Pressing OK exits the display (and autonomous command operation).
Display example with 3 arming events, the fi rst one with two bypassed
zones:
07/22/11 6:55AM
KFOB 05 ARM AWAY -->
07/22/11 6:55AM
<-- BYPASS ZONE 05 -->
07/22/11 6:55AM
<-- BYPASS ZONE 08 -->
07/22/11 9:55PM
<-- USER 05 ARM HOME -->
07/20/11 5:30PM
<-- USER 05 DISARMED