User's Manual

3
REAL TIME CLOCK
The keypad has a real time clock (RTC) that must be set during installation
and after battery replacement. The RTC is required for the keypad to
display time- and date-stamped events, using time offset data received
from the panel. Time and date are also shown during the keypad status
display when the keypad fi rst wakes up:
KEYPAD READY
28/07/2011 12:45AM
Depending on the country/language selected, the time and date format is:
French and Spanish display:
DD/MM/YYYY HH:MM (24 hour time) -- default
US/English display:
MM/DD/YYYY HH:MM (AM/PM)
RTC time and date are set locally at the keypad from the keypad
confi guration menu. A confi guration setting is also provided to manually
turn on Daylight Saving Time (advances or sets back time by 1 hour).
A “clock” key is provided for local keypad operation and confi guration:
• Pressing the clock key once displays the keypad status and time and date on the LCD.
• Pressing and holding the clock key for more than 1 second displays the time and date setting
on the LCD (fl ashing digits), which can then be set using the numbers (0-9) and navigation
keys (
) on the keypad.
• Pressing the clock key again provides the setting for Daylight Saving Time (DST) on/off.
• Pressing OK toggles between AM-PM, DST ON-OFF
• Pressing the clock key once more exits keypad set-up mode and resumes normal operation.
LCD
The keypad has a two line, twenty characters LCD display. The display is
backlit with LEDs for low light conditions.
The LCD display text is controlled by commands from the panel. The
keypad will also display information on the LCD upon wake-up (“keypad
status”) and in response to certain key press combinations.
The LCD is capable of displaying over 200 characters and symbols.