User's Manual

2
KEYPAD OVERVIEW
The LCD Supervised Remote Keypad adds remote control to Alarm Force
Security System Panels. The wireless keypad transmits key presses to the
panel and displays alphanumeric data received from the panel.
A press of any key puts the keypad in a fully operational mode with backlit
LCD and RF Transceiver active. After 15 seconds of inactivity the keypad
will return to the standby mode unless tones are being generated. If tones
are required, then the keypad will enter standby mode only when tone
cycles have been completed.
The keypad can be wall mounted and is powered by four 1.5 volt AA
batteries. The batteries will operate the keypad for three years based
on two minutes of operation per day. If the AA batteries become low, the
keypad will send low battery reports to the panel. The keypad will continue
to operate for 3 months after the fi rst low battery report.
KEYPAD RESOURCES
The keypad consists of 20 silicone rubber keys. The keys are backlit
making it visible in low light conditions.
OK
1
2
3
4
5
6
7
8
9
0
*
#