User's Guide
Copyright © 2018 Nortek Security & Control
33
GC2.5 Wireless Security System | User Guide
To set the date and time:
1 At the Home screen, tap Security.
2 At the Security screen, tap Menu.
3 At the Menu screen, tap Toolbox.
4 At the Toolbox (1 of 3) screen, tap the arrow.
5 At the Toolbox (2 of 3) screen, tap Set Date or Set
Time.
6 Use the and arrows to set the current date or
time. Tap OK.
7 A conrmation screen showing the date and time set
appears. Tap OK.
DISPLAY FIRMWARE VERSION
To troubleshoot your system, you can check the rmware
version that has been installed.
To display the rmware version:
1 At the Home screen, tap Security.
2 At the Security screen, tap Menu.
3 At the Menu screen, tap Toolbox.
4 At the Toolbox (1 of 3) screen, tap the arrow.
5 At the Toolbox (2 of 3) screen, tap Version.
6 When nished, tap Back.
DEALER INFO SCREEN AND CALL BACK
BUTTON
Your 2GIG Alarm Dealer may congure the
Enter Your Code screen to display contact information for
your 2GIG Alarm Dealer or the Central Station.
Accessing the Dealer Info Screen
To access the Dealer Info screen:
1 At the Home screen, tap the system logo.
2 At the Enter Your Code screen, enter the four (4)-digit
master user code.
3 The left side of the Enter Your Code screen reveals
contact information for your 2GIG Alarm Dealer or the
Central Station.
Requesting a Service Call Back
To request a service call back:
1 At the Enter Your Code screen, a call back button
appears at the bottom or the screen.
2 Tap the Call Back button to transmit a report to your
alarm dealer or the Central Station.
When the report is received by the 2GIG Alarm Dealer
or Central Station, you will receive a call back in
accordance with the terms of your dealer’s service
agreement. For additional information about call backs,
consult your 2GIG Alarm Dealer.
System Toolbox