User's Guide

GC2.5 Wireless Security System | User Guide

To setup the chime options individually for each sensor:

1 At the Home screen, tap Security.

2 At the Security screen, tap Menu.

NOTE: Select or clear the Chime and Voice check boxes

to turn the system chimes and voice announcements ON or

OFF (except for alarm voice messages).

3 At the Menu screen, tap Toolbox.

4 Enter the master user code to gain access to the

Toolbox.

5 At the Toolbox (1 of 3) screen, tap Chime Setup. The

Chime Setup screen displays each of the installed

sensors that can chime and the option currently set for

the sensor.

To change the sensor’s chime options, tap the sensor

button.

TIP: There are 14 chime options for each sensor.

6 Check the option that you want for the sensor, then tap

OK.

7 When you are nished, tap Back.

ADJUSTING THE BRIGHTNESS/VOLUME

You can adjust the brightness of the Control Panel’s display

and the volume of the system’s speaker that is best suited

to your installed system.

To set the brightness and volume:

1 At the Home screen, tap Security.

2 At the Security screen, tap Menu.

3 At the Menu screen, tap Toolbox.

4 Enter the master user code to gain access to the

Toolbox.

Chime Option

1 Disabled

2 Voice Only

3 Ding-dong #1

4 Ding-dong with Voice #1

5 Ding-dong #2

6 Ding-dong with Voice #2

7 Ding-dong #3

8 Ding-dong with Voice #3

9 Ding-ding

10 Ding-ding with Voice

11 Chime #1

12 Chime with Voice #1

13 Chime #2

14 Chime with Voice #2

System Toolbox