User's Guide
Copyright © 2018 Nortek Security & Control
25
GC2.5 Wireless Security System | User Guide
READING CONFIDENTIAL MESSAGES
NOTE: When a condential message is sent to the Control
Panel, only the Master User with the master user code can
read the message.
When a condential message appears, the Master User
should do the following:
1 Tap the message line on the message list. If the
message is a condential message, the Code Entry
screen appears.
2 Enter the master user code. Other user codes are not
accepted.
3 View the displayed message.
4 As detailed in "Reading Messages" on page 24, either
save or delete.
FILTERING MESSAGES
To select the type of messages that are displayed on the
message list, use the Message Filter screen.
1 To display the Message Filter screen, tap Filters.
2 Check or clear the boxes of the types of messages to
display. To check all types of messages, tap All. To
return to the message list, tap Back.
The lters will reset when the following occurs:
● You select All Types
● Your message reviewing is over
● The system displays the Security screen
SORTING MESSAGES
To select the order in which messages are displayed on the
message list, use the Message Sort screen.
1 To display the Message Sort screen, tap Sorts.
2 To sort the messages, pick from the following options:
● Date received
● Date expired
● Alphabetically
3 To reverse the display order, check the Reverse box.
4 To list urgent messages rst, check the Priority box.
5 To return to the message list, tap Back.
6 When the message reviewing session is over, the sort
options will reset.
Messaging