Installation Instructions

2 Copyright © 2016 Nortek Security & Control LLC
Figure 3 Removing the Cell Radio Module
7 Plug the new Cell Radio Module into the 2GIG Control Panel by
carefully placing it onto the pins.
8 Secure the module with the two (2) Phillips Head Machine Screws
and Lock Washers.
9 Aach both of the new antennas as described in "Installing the LTE
Cell Radio Module and Antennas" on page 1.
NOTE: If replacing a 3G or CDMA radio, do not reuse the exisng
antenna.
Removing an Internal Antenna
To remove an internal antenna:
1 Disconnect AC power supply from power source.
2 Disconnect the baery from the 2GIG Control Panel.
3 Li up the side flap on the 2GIG Control Panel.
4 Detach the antenna.
5 Pull the internal antenna out from the side of the 2GIG Control
Panel.
Removing an External Antenna
To remove an external antenna:
1 Disconnect AC power supply from power source.
2 Remove the backplate from the Control Panel.
3 Disconnect the baery from the 2GIG Control Panel.
4 Detach the antenna.
5 Pull the external antenna from where it was previously installed.
6 Replace the back cover on the control panel.
Regulatory Information
Regulatory marks are affixed to either the LTE Cell Radio Module and/
or its packaging. For regulatory informaon, submit an ema
il request
to: [e-mail]
Limited Warranty
This Nortek Security & Control product is warranted against defects in
material and workmanship for one (1) year. This warranty extends only
to wholesale customers who buy direct from Nortek Security & Control
LLC or through Nortek Security & Control LLC’s normal distribuon
channels. Nortek Security & Control LLC does not war
rant this product
to consumers. Consumers should inquire from their selling dealer as to
the nature of the dealer’s warranty, if any.
There are no obligaons or liabilies on the part of Nortek Security &
Co
ntrol LLC for consequenal damages arising out of or in connecon
with use or performance of this pr
oduct or other indirect damages
with respect to loss of property, revenue, or profit, or cost of removal,
installaon, or reinstallaon. All implied warranes for funconality,
are valid only unl the warranty expires. This Nortek Security &
Control LLC Warranty is in lieu of all other warranes expressed or
implied.
For technical support in the USA and Canada:
855-2GIG-TECH (855-244-4832)
Email: [e-mail]
Visit website for technical support hours of operaon
For technical support outside of the USA and Canada:
Contact your regional distributor
Visit 2gig.com/dealers/ for a list of distributors in your region
PN:
10013635A
10 Replace the previous FCC label with the new FCC label on the
control panel back cover.