User's Manual
Press and release the button on the side of the
detector twice.
If you’re still having trouble connecting the ADT Motion
Detector, please visit SmartThings.com/Support-ADT
for assistance.
Press and hold the button for 5 seconds until the
red LED starts blinking quickly.
Continue to press and hold the button until the red
LED stops blinking, then release the button and the
red LED will begin to blink slowly.
Use the SmartThings app to complete setup.
1.
2.
3.
4.
Troubleshooting
5
Remove the cover by pressing on the bottom of
the detector.
1.
6
Replacing Batteries
Remove the old battery and insert a new CR123A
battery. Be sure to install the battery correctly.
Replace the cover.
2.
3.
Press