User's Manual

You can test your ADT Door and Window Detector by
opening and closing the door or window where it's been
installed, and then checking its status on the ADT Security
Hub touchscreen or in the SmartThings app.
Press and release the button on the top of the
detector twice.
If you’re still having trouble connecting the ADT Door
and Window Detector, please visit SmartThings.com/
Support-ADT for assistance.
Press and hold the button. The red LED will begin to
blink quickly and after 5 seconds it will stay on.
Release the button and after another 5 seconds the
red LED will begin to blink slowly.
Use the SmartThings app to complete setup.
1.
2.
3.
4.
4
Troubleshooting
5
Testing
Note: If you have an ADT professional monitoring
service activated, make sure that your ADT Security Hub
is in Test Mode to avoid triggering a false alarm. See the
ADT Security Hub User Guide for more details.