Evaporative Humidifier/Cooler The sustainable solution for humidifying and cooling MH Series ™
The NORTEC MH humidifier is the most cost-effective humidifier/cooler available today. data centers laboratories manufacturing institutional research facilities commercial automotive Productivity and quality of life are directly affected by the indoor environment. People work better and feel better in favorable surroundings. So do products and machines! They all respond in various ways to changes in air quality, temperature and humidity.
operating advantages ▶▶ High humidification efficiency ▶▶ Hygiene friendly ▶▶ Free evaporative cooling ▶▶ Safe polyester media ▶▶ Complete packaged system Economy The V-Profile polyester media intensifies the evaporation process providing exceptionally high performance and efficiency. The large surface of the evaporation media results in a high evaporation rate with low energy consumption. The MH Series offers humidification efficiencies of up to 85 and 95%.
technology V-profile Media The core element of the MH unit is the patented humidifier box located in the air duct. Dry air flows through the box, water flows over the hygroscopic media and the extremely large wet surface releases humidity to the air. This method enables air humidifying or cooling with limited electrical energy. The V-profile humidifier box consists of synthetic media with an impressed V-profile which enables a more intensive exchange of air and water.
• Direct Water System • • • Models Total Control (TC) System with Full Backlit Display The Nortec MH Series is available in two basic versions. The flow model with direct water drainage and the REflow model for water recirculation. Whether to use a flow or REflow system depends considerably on the primary application of humidifying or cooling and the supplied water quality.
options Bringing Tomorrow’s Humidifier Support to You... Today! NORTEC LINKS 2 NORTEC LINKS 2 offers advanced monitoring and control allowing the MH units to communicate to your local Building Management System (BMS) via BACnet MSTP or IP, LonWorks, or Modbus protocols. LINKS2 also provides internet ready monitoring and control (consult factory).
technical data Specification Media Box Efficiency max. 85% and 95% Maximum Face Velocity over Media 750 fpm (3.8 m/s) Maximum Face Velocity with Integral Mist Eliminator 1080 fpm (5.5 m/s) Pressure Drop at 500 fpm 0.25 IWC (62 Pa) Fire Protection Rating UL 900 Class I Power supply pump (REflow, REflow C, REflow SC) 120 VAC/1, 50 and 60 Hz Power consumption 0.2 - 0.
Form 09-460 Printed on Recycled Paper Printed in Canada U.S.A. Walter Meier (Climate USA) Inc. 826 Proctor Avenue Ogdensburg, NY 13669 CANADA Walter Meier (Climate Canada) Ltd. 2740 Fenton Road Ottawa, Ontario K1T 3T7 1.866.NORTEC1 613.822.7964 email: northamerica.climate@waltermeier.com WEBSITE: www.humidity.com Tel: Fax: www.norteconline.com www.nortecparts.com Certificate No.
